XR0024/XR0045 FXS Modules Data Sheet

XR0024 FXS Module (top view)

• Logic 3.3 VDC @ up to 0.3 amp

• Low battery voltage (off-hook) -24 to -30 Vdc @ up to 360 Milli-Ampere.
• High battery voltage -80 to -92 Vdc produces ring -80-92 Volts ring alternate current, Sinusoidal, software programmable via the Asterisk XPP (Xorcom Peripheral Protocol ) driver.

The modules support 100% electronic telephony operation (no relays) based on solid-state SLICs (Subscriber Line Interface Cards), with built-in surge protection of up to 1,500 Volts.

Additional Functionality

• Caller ID support
• MWI (Message Waiting Indicator) support

The modules include eight RJ11 ports for line connection. Each port has two LEDs (Light Emitting Diodes). The green LED indicates port status:

• Solid green = off-hook, engaged line
• Blinking green = ringing

The Red LEDs are used for special indications (on, synchronized, active) when the module is installed on the first (leftmost) position in an Astribank.

Each module has an on-board 16-pin male connector to support the TCO (telecom connector) option on the Astribank.

XR0045 FXS Module with I/O Ports (top view)

To assure reliable, long term operation of the FXS modules forced-air cooling is mandatory.

Environmental Operation Information

• Temperature: 0-40 degrees Centigrade
• Humidity: up to 95%, non-condensing

Physical Dimensions

• 90x105 Millimeters

Certifications

• FCC 47CFR part 15 subpart B
• RoHS
• EC
• XPP (Xorcom Peripheral Protocol) compliant

Specifications may change without prior notice.

 Download XR0024-XR0045 FXS Modules data sheet