Asterisk®-based PBX Solutions

TwinStar: Full PBX Redundancy

Xorcom's dual-server high availability solution for Asterisk-based PBX

Best of Show Award for TwinStar

received the "Best of Show" award. Find out why!

Astribank 2 Drivers: BRIstuff

The BRIstuff package may be downloaded by using the following link:

http://updates.xorcom.com/astribank/bristuff/1.4/bristuff-current.tgz

Please refer to the included README file for further instructions about building and installing the BRIstuff on your Asterisk server.

Please refer to the “Zaptel Notes” page for further instructions about Astribank reset and configuration.

Important to Note:

The official BRIStuff package includes Zaptel only (reference http://www.junghanns.net). The Xorcom BRIstuff version is based on the official version but includes newer Astribank Zaptel drivers. Because TwinStar hot failover is supported in DAHDI only, this package does not include TwinStar-related scripts.
fxload is not a part of DAHDI or Asterisk. It must be installed separately.
If you want to use Elastix, then you can use Xorcom's "BRIstuffed" Asterisk, DAHDI and libpri packages.

Last Updated ( Monday, 15 February 2010 )

Send to a friend

Best of Show Award - IT Expo West 2009

Astribank Wins Best of Show

Astribank, Xorcom's innovative USB-connected channel bank specifically designed for Asterisk, was awarded "Best of Show" in the "Open Source Solution" category at the IT Expo held recently in Los Angeles.
Watch video interview from the event.

Can You Run 300 Concurrent Calls on an Asterisk Server?

Find out the answer and more in the results from load tests recently performed on the XR3000, and explained in the "Five Culprits that Kill Asterisk IP-PBX Performance" recorded webinar.

Feedback Form