Home 
Support Upgrades & Downloads Astribank 2 Drivers Overview
Support Upgrades & Downloads Astribank 2 Drivers Overview
Astribank 2 Drivers Overview |
|
The new Astribank models, known as ‘Astribank 2’, require an advanced version of DAHDI/Zaptel. When appropriate software packages are installed, it is possible to use combinations of the old (Astribank) and the new (Astribank 2) devices connected to the same Asterisk server.
Determine Which Upgrade You Need for Astribank 2
|
||||||||||||||||||||||||||||||
How to Check Which Model Astribank You Have | Environment |
Astribank 2 |
|
| Elastix 1.5 (DAHDI 2.2.0.2-4) |
config tips | |
| Elastix 1.5 ("plain vanilla") | upgrade | |
| Elastix 1.3 |
upgrade | |
| Elastix <1.3 | upgrade | |
| trixbox CE 2.8 |
config tips |
|
| trixbox CE 2.6.2.3 | config tips | |
| trixbox CE 2.6.2.2 | upgrade | |
| trixbox CE<2.6.2.2 | upgrade | |
| Install from Source | ||
| DAHDI (Asterisk 1.4.22 and above) |
upgrade | |
| Zaptel 1.4.0-1.4.21 | upgrade | |
| Zaptel 1.2x |
not supported |
|
| BRIstuff | upgrade | |
How to Check Which Astribank Model You Have
Following are indications of the new Astribank 2 models:
- For all new Astribank devices and XR1000/2000/3000 servers, the serial number starts from {X,U}1036300.
- The 1U Astribank models now have two USB sockets on the rear panel (instead of one).
- The Astribank 2 USB Product ID is 116n. USB Product IDs of the old Astribank models are 113n, 114n and 115n.
For example, output of the lsusb utility on a computer with the new Astribank connected would be as follows:
# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID e4e4:1162
Bus 004 Device 001: ID 0000:0000
Therefore, in this example, there is an Astribank 2 model connected at Bus 001, Device 002.
Download Complete Instructions as PDF File (192.2 Kb)
