SMB Enhanced IP-PBX - XE2000

XE2000 is a stand-alone, pre-configured, out-of-the-box Asterisk IP PBX optimized for businesses with high call volumes and / or additional communications applications

The XE2000 is an Elastix™ Asterisk IP PBX system supporting various combinations of telephony ports. The stand-alone XE2000 base unit may be equipped with up to 32 analog FXS/FXO ports, up to 8 BRI ports, and 1 E1/T1 PRI, 1 T1 CAS, or 1 E1 R2 port in a single, 19" 2U chassis. Additional PSTN / Analog phone ports can be provided by connecting external Astribank units via the USB2 ports, for a total of up to 160 PSTN / Analog phones ports, up to 200 users and up to 85 concurrent calls (SIP only); 45 for PRI / FXS.

The robust XE2000 comes standard with a dual hard drive (RAID1), redundant fans for cooling, internal backup and restore, front panel USB access, and two Ethernet ports to allow separation of IP voice and data traffic for improved voice quality and increased throughput.

A multi-function LCD (Liquid Crystal Display) on the XE2000 allows the system administrator to perform several of the most common functions directly on the front panel of the IP-PBX without having to attach a keyboard and monitor. The touch panel uses a text-based menu tree to facilitate monitoring, maintenance and troubleshooting of the entire telephony system.

Also available with the XE2000 is the Xorcom Rapid Recovery™ backup utility, provided on Disk-on-Key. XE2000 units with an FXS module support Xorcom Rapid PA to provide public address functionality to Asterisk installations, and are also offered with I/O ports to support a wide array of peripheral devices.

The XE2000 comes in a professional industry standard 19” 2U rack-mountable chassis.

Up to four Astribank units may be connected to a single XE2000 server using different USB 2.0 ports, a USB 2.0 hub or USB 2.0 PCI card.

Architecture

Applications

Complete, stand alone IP-PBX for medium-sized businesses and enterprises (SMB and SME)
Complete telephony system for hotels and condominiums - read more
CLEC (Competitive Local Exchange Carriers) IP-PBX - read more

 

Features

Software features list
Various combinations of FXS, FXO, BRI ISDN and PRI/CAS/R2 ports
Supports SIP and IAX2 phones and trunks
From 8 to 32 analog lines/extensions integrated into the unit
Up to 8 BRI ISDN ports
Single ISDN PRI (E1/T1) T1 CAS, or E1 R2 port
Up to 4 external Astribank USB channel banks
Concurrent calls: Up to 85 (SIP only); 45 (PRI + FXS)
Supports auxiliary appliances (door locks, alarm systems). Available for models that feature I/O ports.
FreePBX™ - Easy-to-use Web interface for Asterisk and network setup

Advanced support and maintenance features:

  • Rapid Tunneling™ - opens a secured direct SSH tunneling to our support engineers upon user's request. Get our direct support wherever you are, behind firewalls and NATs.
  • Internet updates
  • Configuration export / import

 

Software

Asterisk version 11.x (Elastix 2.4x)
Linux version CentOS 5.x
GUI Based on FreePBX
Rapid Tunneling™ Utility providing remote access for product support purposes

Hardware

Processor Intel Atom D2500, Dual Core, 1.86GHz
RAM 2 GB
Hard disk From 320GB 2.5" (optional upgrade to 500GB)
RAID1 Dual hard drive for increased system reliability
Fan 3 redundant fans
Echo Cancellation module Voice enhancement & echo cancellation (optional)
USB 2 external USB 2.0
Analog Lines Fail-over In case of power outage or an Asterisk malfunction, up to six analog PSTN lines are routed directly to predetermined analog extensions.
I/O Ports Input/Output ports for Asterisk peripheral device support (model-specific)
Rapid PA™ Public Address capability for FXS port(s) (optional and model-specific)

Telephony

Maximum number of concurrent calls 85 *Depends on codec used
Maximum number of built in analog ports 32 (additional ports with external Astribank units)
Number of E1 / T1 ports 1 (up to 30 concurrent PRI/R2/CAS calls)
Maximum telephony modules supported internally 4 (additional ports are supported by adding Astribank units)
Maximum number of telephony ports supported internally 54 (1x E1 PRI/R2/CAS + 24 analog ports)

Supported telephony modules

Elastix Hardware Certification
  • 8 ports FXS
  • 8 port FXS + I/O ports
  • 8 ports FXO
  • 2 ports FXO, 6 ports FXS + I/O ports
  • 6 ports FXO, 2 ports FXS
  • 1 E1 / T1 PRI/R2/CAS port
  • Up to 8 BRI ISDN ports

Network

Ethernet port 2x 10/100/1000 Mb/s

Maintenance and Support

LCD (Liquid Crystal Display) touch panel, supporting:

  • Status of active systems, including:
    • all configured IP addresses
    • TwinStar™ (dual-server redundancy)
    • Redundant Power Supply (when using the external RPS unit for Astribanks)
    • Blink ports (extensions, channels, XPD and SPAN)
    • Active calls
  • Maintenance issues, including:
    • Asterisk restart
    • DAHDI restart
    • Server reboot
    • Server power off
  • Settings, including:
    • Enable/disable DHCP
    • Manual IP configuration
Monitor and keyboard support
Internal backup & restore utility
External Rapid Recovery™ backup utility provided on Disk-on-Key
Rapid Tunneling™ utility providing secure remote access for product support purposes
Internet updates

Power

Power supply Internal
Voltage Switching, auto adjust 100/240 Volts, 50/60 Hz
Power consumption 230 Watts (maximum)
Built in grounding connection Yes

Environment

Storage temperature -20° to 70° Celsius (-4°-158° F)
Working temperature 0° to 40° Celsius (32°-104° F)
Humidity 20%-95%, non condensing

Dimensions and Weight

Weight 4.3 Kg 9.5Lbs (weight may vary and depends on configuration)
Size 19" 2U industry standard rack-mountable chassis
Dimensions 44 x 36.3 x 9 cm (17.3 x 14.3 x 3.5”)

*Specifications may change without prior notice.

Analog Models

Telephony Ports Optional Extras Part Number
FXS FXO I/O Ports TCO Analog Fail-over  
- 8 - -   XE2019
- 16 - -   XE2020
- 24 - -   XE2021
- 32 - -   XE2022
2 6 - -   XE2012
6 2 + -   XE2030
8 - + +   XE2001
8 8 + + + XE2004
8 16 + + + XE2007
8 24 + +   XE2011
16 - + +   XE2003
16 8 + + + XE2006
16 16 + +   XE2010
24 - + +   XE2005
24 8 + +   XE2009
32 - + +   XE2008

BRI ISDN Models

Telephony Ports Optional Extras Part Number
BRI FXO FXS TCO Analog Fail-over  
2 - - -   XE2013
2 8 - -   XE2087
2 - 8 +   XE2033
2 8 8 +   XE2090
2 16 - -   XE2088
2 - 16 +   XE2065
2 8 16 +   XE2092
2 16 8 +   XE2091
2 24 - -   XE2089
2 - 24 +   XE2066
4 - - -   XE2014
4 8 - -   XE2093
4 - 8 +   XE2029
4 8 8 + + XE2096
4 16 - -   XE2094
4 - 16 +   XE2031
4 8 16 +   XE2098
4 16 18 +   XE2097
4 24 - -   XE2095
4 - 24 +   XE2032
8 - 8 +   XE2042
8 - - -   XE2015
8 8 - -   XE2099
8 8 8 +   XE2102
8 16 - -   XE2100
8 - 16 +   XE2043
8 8 16 +   XE2104
8 16 8 +   XE2103
8 24 - -   XE2101
8 - 24 +   XE2044

PRI/R2 Models

Telephony Ports Optional Extras Part Number
PRI / R2 / CAS FXO FXS TCO Analog Fail-over  
1 - - -   XE2047
1 8 - -   XE2069
1 - 8 +   XE2048
1 8 8 + + XE2072
1 16 - +   XE2070
1 - 16 +   XE2049
1 8 16 +   XE2074
1 16 8 +   XE2073
1 24 - -   XE2071
1 - 24 +   XE2050
Last Updated ( Monday, 22 Dec 2014 )
Quick Contact
Invalid Input
Invalid Input
Invalid Input
Invalid Input
Subscribe to newsletter Invalid Input
Enter this code in the field below:*
Invalid Input