Live-CD Quick Start
New version released on May, 2008
Download Xorcom Rapid ™ Live CD Ver. 1.2 Now! |
|
1. Connect your Astribank(s) to the USB 2.0 port of the computer.
2. Insert the Xorcom Rapid ™ Live-CD and restart the computer
3. when the menu is displayed, your Asterisk and Astribank(s) are running!
Notes:
- The computer boots from the Live-CD. The hard drive is not affected at all.
- Do not forget to connect your Astribank to the main power supply.
- If your computer does not boot from the CD, change the BIOS settings. One of the BIOS options configures the computer to try booting first from the CD.
- The Xorcom Rapid ™ Live-CD also detects and installs Digium and other Zaptel devices.
- Use the Hardware page to display your Astribanks and other Zpatel hardware and use basic diagnostic operations.
- To log-in to the Asterisk computer from any other computer simply enter the Asterisk computer's IP address or name into your browser and access the freePBX setup screen. You will have to enter the default user name and password, (user name: admin & password: admin).
- Use the console or remote terminal (AjaxTerm) to access the root or the Rapid ™ menus. (User: user & Password: live). To work as root, after you have logged-in, type: sudo –i
Send your comments to: support@xorcom.com
Enjoy!
Xorcom R&D team
Important: The live CD is for tests and demonstrations and should not be used as an operational PBX. All configuration changes made on the system will be saved only in the RAM and will be erased upon reboot. For operational PBX please use the Xorcom Rapid installation version.
|
|