IP PBX search results on

VoIP Knowledge Base

How to install ccStatsPro on CompletePBX 4.x Twinstar

IP PBX Documentation, VoIP Knowledge Base

Make sure that the PBX is connected to the Internet and the DNS settings are correct. 1. On srv-a Install ccStatsPro on the srv-a as it is described in this Wiki article: http://wiki.xorcom.com/How_to_install_ccStatsPro_on_CompletePBX 2. On srv-a Move ccStatsPro files...

How to install Complete Concierge

IP PBX Documentation, VoIP Knowledge Base

How to install Complete Concierge...

Spark Logging

IP PBX Documentation, VoIP Knowledge Base

Journal Logging – Introduction In Spark units, the logging system has undergone some changes. Previously, log files such as maillog and Apache error_log (among others) were handled by numerous daemons and processes such as syslog, which commonly placed the logs...

How to Setup and Use a Rapid Tunneling Server

IP PBX Documentation, VoIP Knowledge Base

Version: 1.15 The Rapid Tunneling server software was developed and tested on CentOS 5.X systems. Xorcom provides RPM for easy server installation in CentOS. Please contact Xorcom technical support ([email protected]) if you want to set up the Rapid Tunneling server...

Building Astribank Drivers from Source

IP PBX Documentation, VoIP Knowledge Base

Astribank drivers are part of DAHDI packages. So in most of the cases, you can use the binary packages from your Linux distribution repositories. But sometimes you may want to build the DAHDI drivers from sources. In this article, we will give you outlines of the...

How to install ccStatsPro on CompletePBX 5.x

IP PBX Documentation, VoIP Knowledge Base

1. Make sure that the PBX is connected to the Internet and the DNS settings are correct.2. Install the Call Center Statistic module:cd /root wget http://updates.xorcom.com/~xorcom/ccstatspro-inst-cpbx-5.sh chmod +x ccstatspro-inst-cpbx-5.sh...

« Older Entries