Multi-Tenant PBX – MT Manager Software Update 1.0.17
SIP Trunk Compatibility Improvements It is now possible to use the IP ports to authenticate the tenant, in addition to the previously available options of IP address and fully-qualified domain name (FQDN). Improvements in topology hiding in SIP messaging (security) ...
CompletePBX 5.0.70 – PBX Software Updates
Improvements Queue failover destination can no longer be set to itself (to the same queue) when "join empty" is disabled, so that the PBX administrator will not accidentally create a setting that causes an infinite loop. User profile can no longer be deleted when...
Multi-Tenant PBX – MT Manager Software Update 1.0.16
Security Improvements Web access whitelist for the MT Manager administration It is now possible to define a whitelist of IP addresses. Web access to the MT Manager will only be allowed from those IP addresses. All other addresses will be blocked. Leaving the...
CompletePBX 5.0.69 – PBX Software Updates
Vtech IP Phones - New Models Supported New Vtech IP phone models added to Endpoint Manager: Vtech VCS754 - Conference room IP phone Vtech VCS752 - Conference room IP phone Vtech CTM-S341 - Hospitality IP phone Grandstream IP Phones - New Models Supported New...
Multi-Tenant PBX – MT Manager Software Update 1.0.14
Bulk ActionsThis update introduces Bulk Actions to the MT Manager.Using Bulk Actions you can select to apply an action on more than one tenants.When selecting one or more tenants, the top bar will show available actions to perform on the selected tenants.The currently...
CompletePBX 5.0.68 – Improvements & Bug Fixes
Drop Unrecognized calls This new feature allows the PBX to drop calls made to unrecognized DIDs, without answering the call and playing a message. This was the sender can know the call failed. There is no change in the default CompletePBX behavior, but this behavior...
Multi-Tenant PBX – MT Manager Software Update 1.0.12
Strong Password Enforcement A strong password enforcement policy is now applied to all MT Manager login passwords (admin & reseller). When entering a password the user now gets a colored bar at the bottom of the field indicating the password strength (red - weak,...
CompletePBX 5.0.67 – User Portal & Multi-Tenant Improvments
PBX Portal Users Setup Automation and Self Management Automated sending of login credentials to new portal users: In order to streamline the setup of new users, the system now allows automatic sending of PBX User Portal credentials directly to the user upon setup....
Xorcom Appliances Go SSD
Starting the month of April 2019 all Xorcom CompletePBX appliances of series CXR2000 and up are going to be equipped with SSD (Solid State Drives) rather than the currently-used enterprise-grade HDD. The change will significantly increase read and write speed, which...
CompletePBX 5.0.66 – Important Privacy Fix
Important Call Recording Fix This version fixes a potential call recording issue introduced in version 5.0.65 Users that never upgraded to version 5.0.65 will not be affected For systems that are updated to version 5.0.65 it is highly recommended to upgrade to version...
CompletePBX 5.0.65 – Xorcom UC IP Phone Support
Xorcom UC Series IP Phones Provisioning Added The UC IP Phone series templates were added to the Endpoint Manager The available templates: UC902 - Basic IP Phone UC912G - 1GB IP Phone UC924 - Color IP Phone UC926 - Color IP Phone UC46 IP Phone Expansion Unit Asterisk...
CompletePBX 5.0.64 – Trunks, IP Phone Provisioning & More
Trunk Settings The default ring-time for trunks is now set at 120 seconds (previously 30 seconds) under Settings -> PBX Settings -> System General: It is now possible to set Channel, and not only Channel Group, as a destination for trunks (PBX -> External...
CompletePBX 5.0.63 – PBX High Availability Improvements & More
TwinStar PBX High-Availability Improvements TwinStar failover upon network disconnection TwinStar can now be set to detect network disconnection and failover to the secondary server in such case This is useful when each of the TwinStar servers is connected through a...
CompletePBX 5.0.62 – Cisco SPA IP Phone Provisioning
Cisco SPA 303 & SPA 502G Provisioning Cisco SPA 303 and Cisco SPA 502G models are now supported by the Endpoint manager with all its provisioning features: Other VM notification email now supports languages that require UTF8 encoded for subject and email body...
CompletePBX 5.0.61 – Bug Fixes
Fixed a problem that caused the PBX to consider a hot desking extension as an available queue agent even when all extension's devices are logged off Firewall configuration is applied much faster. The current IP connection...
CompletePBX 5.0.60 – Improved CDR & PBX GUI
CDR (Call Details Record) Improvements Hot Desking login and logout is now visible in CDR reports. When a user logs into or out of a device this will generate a line in the CDR showing the extension (user), device and action performed (login/logout): CDR filtering by...
Xorcom CompletePBX Software Repository Changes
Staring from CPBX v.5.0.60 the source of all CentOS 7, Epel and CPBX packages is set to be the repo1.xorcom.com server. The switch from the standard CentOS 7 and Epel repositories to the new repositories is performed by the new xorcom-centos-release package that is...
CompletePBX 5.0.59 – Improved IP Phone Provisioning and More
Import/Export Endpoint Manager Device Mapping A new Import/Export feature was added to Endpoint Manager IP phone provisioning module: The feature works like all the other import/export features in CompletePBX, and allows for importing IP Phones to Device Mapping by...
CompletePBX 5.0.58 – Improved Reporting and Email Integration
DID (Direct Inbound Dialing) in Queue Log Special messages that contain DID information are sent now to the "queue_log". It is now possible to create reports based on DID in Call Center Statistics. Changing "From" Email Address for System Notifications It is...
CompletePBX 5.0.57.2 – Minor FXO Related Bug Fix
In some cases, when FXO trunks are set along with other specific settings, Inbound Routes module would not be accessible in the GUI. The issue is fixed by this minor version update.