0 Items

VoIP PBX Technical Updates

CompletePBX 5.1.14 – PBX Software Updates

CompletePBX 5.1.14 – PBX Software Updates

 PBX improvements and bug fixes.  Asterisk packages update.If you are upgrading a Spark system, you may ignore the special instructions.For any other system of version 5.0.59 or lower please perform the following steps: 1. run yum install xorcom-centos-release 2. run...

read more
XR0045 End-of-Life Announcement

XR0045 End-of-Life Announcement

this module has reached end-of-life and is no longer availableWe hereby announce the end-of-life of the XR0045 analog module with 2 FXS and 6 FXO ports.  The module is being used is various Astribank and PBX appliance models (as detailed below, and these models...

read more
CompletePBX 5.1.13 – PBX Software Updates

CompletePBX 5.1.13 – PBX Software Updates

Improvements in the PBX Supervision Switchboard, StatsExplorer call statistics, security improvements for CloudPhone mobile PBX extension app, and additional system improvements and bug fixes. Note:  This update requires a system reboot to complete.If you are...

read more
CompletePBX 5.1.12 – PBX Software Updates

CompletePBX 5.1.12 – PBX Software Updates

PBX API improvements, IP phone provisioning now supports UC921G IP phone, additional improvements - RADIUS, GUI and more.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...

read more
Multi-Tenant PBX – MT Manager Software Update 1.0.26

Multi-Tenant PBX – MT Manager Software Update 1.0.26

Auto-Update to Tenant on App Activation When activating a new app, the tenant CompletePBX instance automatically updates to the latest available version. This is done in order to ensure the best compatibility and user experience possible. In some cases, the tenant...

read more
CompletePBX 5.1.11 – PBX Software Updates

CompletePBX 5.1.11 – PBX Software Updates

Improvements in CloudPhone and SIP video support, codecs management, VP8 video codec support, API improvements and various stability improvements.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following...

read more
Multi-Tenant PBX – MT Manager Software Update 1.0.26

Multi-Tenant PBX – MT Manager Software Update 1.0.23-1.0.25

1.0.25 DID-Based Routing Now Supports "+" and Other Characters It is now possible to route numbers that are received from the SIP provider with the "+" prefix using DID Routing. All the following are now allowed in the configuration:  "+._a-zA-Z"1.0.24 New Default...

read more
CompletePBX 5.1.10.1 – PBX Software Updates

CompletePBX 5.1.10.1 – PBX Software Updates

CloudPhone now supports CompletePBX phonebooks and has improved CompletePBX settings. RADIUS authentication support added. Additional improvements and bug fixes.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow...

read more
CompletePBX Security Update (OFC 1.02.0)

CompletePBX Security Update (OFC 1.02.0)

Security Alert CompletePBX Intrusion Detection doesn't block the SIP intrusion attempts after upgrading to CompletePBX v.5.1.9 Affected systems The CentOS-based CompletePBX v.5.1.9 appliances and the virtual systems are affected. The older systems are not affected....

read more
CompletePBX 5.1.9.2 – PBX Software Updates

CompletePBX 5.1.9.2 – PBX Software Updates

Various PBX improvements and bug fixes. NOTE:  This upgrade requires a reboot to complete IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2....

read more
CompletePBX 5.1.8 – PBX Software Updates

CompletePBX 5.1.8 – PBX Software Updates

PBX stability and bug fixes, backup and restore and other usability improvementsIMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2. run yum...

read more
Multi-Tenant PBX – MT Manager Software Update 1.0.22

Multi-Tenant PBX – MT Manager Software Update 1.0.22

CloudPhone Mobile Softphone Support in MT Manager  The CloudPhone mobile softphone app for iOS and Android [link to page] was added to the MT Manager multi-tenant PBX Apps options: Setting the CloudPhone App to on for a tenant in the MT Manager interface will open the...

read more
Multi-Tenant PBX – MT Manager Software Update 1.0.22

CompletePBX 5.1.7 – PBX Software Updates

CloudPhone mobile softphone app to CompletePBX with seamless deployment tools, SNMP monitoring, compatibility with IDS PMS, new Vtech models support and API improvements.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or...

read more
CompletePBX 5.1.6 – PBX Software Updates

CompletePBX 5.1.6 – PBX Software Updates

In this CompletePBX update: Instant messaging over SIP, Voicemail improvements, new API function, bug fixesIMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...

read more
CompletePBX 5.1.5 – PBX Software Updates

CompletePBX 5.1.5 – PBX Software Updates

In this CompletePBX update: GUI improvements, users management via API, licensing API, PBX backup automation and bug fixes.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...

read more
CompletePBX 5.1.4 – PBX Software Updates

CompletePBX 5.1.4 – PBX Software Updates

This release contains improvements in PBX API, backup and restore options, caller ID pattern match on outbound routes, "hairpinning" (dialing directly to an inbound route), on-demand call recording improvements and various bug fixes.IMPORTANT NOTE When upgrading any...

read more
Multi-Tenant PBX – MT Manager Software Update 1.0.21

Multi-Tenant PBX – MT Manager Software Update 1.0.21

DID-Based Inbound Call routing It is now possible to route inbound calls based on the DID (dialed number). This feature can be used when working with a SIP provider that does not define the tenant Fully Qualified Domain Name (FQDN) in the SIP requests and, therefore,...

read more
CompletePBX 5.1.3 – PBX Software Updates

CompletePBX 5.1.3 – PBX Software Updates

This release contains improvements and bug fixes.   IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2. run yum update This will ensure the...

read more
CompletePBX 5.1.2 – PBX Software Updates

CompletePBX 5.1.2 – PBX Software Updates

In this release New API features  Concurrent calls report New VTech phones Additional improvements & bug fixes IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...

read more
CompletePBX 5.1.1 – PBX Software Updates

CompletePBX 5.1.1 – PBX Software Updates

In this release Multiple usability and feature improvements for PBX administration. Various bug fixes. IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...

read more