read more
Phone System Redundancy
Choose VoIP Product
Price Quotation Request
Certified VoIP Training
Contact Xorcom
Related materials:
IP-PBX with Built-in Redundancy CXT4000
Multi-Tenant PBX – MT Manager Software Update 1.0.26
Auto-Update to Tenant on App Activation When activating a new app, the tenant CompletePBX instance automatically updates to the latest available version. This is done in order to ensure the best compatibility and user experience possible. In some cases, the tenant...
Multi-Tenant PBX – MT Manager Software Update 1.0.23-1.0.25
1.0.25 DID-Based Routing Now Supports "+" and Other Characters It is now possible to route numbers that are received from the SIP provider with the "+" prefix using DID Routing. All the following are now allowed in the configuration: "+._a-zA-Z"1.0.24 New Default...
Multi-Tenant PBX – MT Manager Software Update 1.0.22
CloudPhone Mobile Softphone Support in MT Manager The CloudPhone mobile softphone app for iOS and Android [link to page] was added to the MT Manager multi-tenant PBX Apps options: Setting the CloudPhone App to on for a tenant in the MT Manager interface will open the...
CompletePBX 5.1.5 – PBX Software Updates
In this CompletePBX update: GUI improvements, users management via API, licensing API, PBX backup automation and bug fixes.IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...
CompletePBX 5.1.4 – PBX Software Updates
This release contains improvements in PBX API, backup and restore options, caller ID pattern match on outbound routes, "hairpinning" (dialing directly to an inbound route), on-demand call recording improvements and various bug fixes.IMPORTANT NOTE When upgrading any...
Multi-Tenant PBX – MT Manager Software Update 1.0.21
DID-Based Inbound Call routing It is now possible to route inbound calls based on the DID (dialed number). This feature can be used when working with a SIP provider that does not define the tenant Fully Qualified Domain Name (FQDN) in the SIP requests and, therefore,...
CompletePBX 5.1.3 – PBX Software Updates
This release contains improvements and bug fixes. IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2. run yum update This will ensure the...
CompletePBX 5.1.2 – PBX Software Updates
In this release New API features Concurrent calls report New VTech phones Additional improvements & bug fixes IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...
CompletePBX 5.1.1 – PBX Software Updates
In this release Multiple usability and feature improvements for PBX administration. Various bug fixes. IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum...
CompletePBX 5.1.0.3 – PBX Software Updates
Scope of this Release This release fixes two issues from version 5.1.0.2 Endpoint manager import issue Import speed dial issue IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run...
CompletePBX 5.1.0.2 – PBX Software Updates
Scope of this Release This release introduces new phone models support, HTTPS settings, class-of-service improvements, H323 trunks support, and several other features and fixes. In addition to the features and fixes listed below, this release contains all the items...
CompletePBX 5.0.78 (beta) – PBX Software Updates
IMPORTANT NOTES When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2. run yum update This will ensure the system will be updated from the correct repositories....
CompletePBX 5.0.77 – PBX Software Updates
IMPORTANT NOTE When upgrading any CompletePBX system (excluding Spark) from version 5.0.59 or older, follow the following procedure: 1. run yum install xorcom-centos-release 2. runyum update This will ensure the system will be updated from the correct repositories....
CompletePBX 5.0.76 – PBX Software Updates
Improved Conference Calls Recording Conference call recording now records the conference call independently of the participants' channels. In previous versions setting Record to Yes in Conferences would result in recording the channels of the individual participants....
Multi-Tenant PBX – MT Manager Software Update 1.0.20
New Apps in MT Manager This version introduces the StatsExplorer App for call center statistics reporting with its extension - Wallboards, for real-time performance monitoring.Both apps are activated via the App dialogue.The Wallboards app can only be activated on...
CompletePBX 5.0.75 – PBX Software Updates
Note: This update contains DAHDI drivers updates that require additional steps to be taken during the upgrade. Please read through before performing the update. The DAHDI update is not relevant for pure VoIP systems. FXS Hotline It is now possible to set up a hotline...
CompletePBX 5.0.74 – PBX Software Updates
Random Caller ID for Outbound Calls (Call Center) It is now possible to randomize the caller ID of outbound calls. This is usefull for outbound call centers and other services that want to avoid being blocked or ignored. To set this feature: Prepare a list of caller...
CompletePBX 5.0.73 – PBX Software Updates
Bug FixesIt was not possible to set PM time in System Settings. Fixed. Now a 24-hour clock is available in the widget.It was not possible to add certain patterns in Dialing Restriction Rules (PBX -> Class of Service - Dialing Restriction Rules). Fixed.In certain...
CompletePBX 5.0.72 – PBX Software Updates
Supervision Switchboard Support Supervision Switchboard is now supported in CompletePBX under MT Manager multi-tenant PBX platform. When installed, the Supervision Switchboard will appear in the administration and user-portal menus. Single-sign-on - using Application...
Multi-Tenant PBX – MT Manager Software Update 1.0.19
Supervision Switchboard Available for PBX Tenants Supervision Switchboard now available for PBX tenants as a App (Edit Tenant -> Apps) Once activating and saving, the tenant will update and install the Supervision Switchboard. This will be indicated by an icon in...
CompletePBX 5.0.71 – PBX Software Updates
Improvements It is now possible to change the range of RTP ports. This is configured in Settings -> PBX Settings -> System General -> General -> RTP Settings You can now set the system to include SIP DIVERSION header field in the INVITE request, which is...
Multi-Tenant PBX – MT Manager Software Update 1.0.18
Bulk-Upgrade of Tenant PBX Bulk software upgrade for Tenant PBXs is now available via the MT Manager GUI. To upgrade one or more systems select the systems using the checkbox and then click the Upgrade icon. Cancel Pending Actions on Tenant PBXs When performing an...
IP PBX Phone System Failover Twinstar Plus CXTS3000
VoIP-PBX Failover System CTS3000
IP-PBX (Private Branch Exchange) Failover System CTS2000
IP-PBX with Built-in Redundancy
Multi-Tenant PBX – MT Manager Software Update 1.0.17
SIP Trunk Compatibility Improvements It is now possible to use the IP ports to authenticate the tenant, in addition to the previously available options of IP address and fully-qualified domain name (FQDN). Improvements in topology hiding in SIP messaging (security) ...
CompletePBX 5.0.70 – PBX Software Updates
Improvements Queue failover destination can no longer be set to itself (to the same queue) when "join empty" is disabled, so that the PBX administrator will not accidentally create a setting that causes an infinite loop. User profile can no longer be deleted when...
Multi-Tenant PBX – MT Manager Software Update 1.0.16
Security Improvements Web access whitelist for the MT Manager administration It is now possible to define a whitelist of IP addresses. Web access to the MT Manager will only be allowed from those IP addresses. All other addresses will be blocked. Leaving the...
CompletePBX 5.0.69 – PBX Software Updates
Vtech IP Phones - New Models Supported New Vtech IP phone models added to Endpoint Manager: Vtech VCS754 - Conference room IP phone Vtech VCS752 - Conference room IP phone Vtech CTM-S341 - Hospitality IP phone Grandstream IP Phones - New Models Supported New...
Multi-Tenant PBX – MT Manager Software Update 1.0.14
Bulk ActionsThis update introduces Bulk Actions to the MT Manager.Using Bulk Actions you can select to apply an action on more than one tenants.When selecting one or more tenants, the top bar will show available actions to perform on the selected tenants.The currently...
CompletePBX 5.0.68 – Improvements & Bug Fixes
Drop Unrecognized calls This new feature allows the PBX to drop calls made to unrecognized DIDs, without answering the call and playing a message. This was the sender can know the call failed. There is no change in the default CompletePBX behavior, but this behavior...
Multi-Tenant PBX – MT Manager Software Update 1.0.12
Strong Password Enforcement A strong password enforcement policy is now applied to all MT Manager login passwords (admin & reseller). When entering a password the user now gets a colored bar at the bottom of the field indicating the password strength (red - weak,...
CompletePBX 5.0.67 – User Portal & Multi-Tenant Improvments
PBX Portal Users Setup Automation and Self Management Automated sending of login credentials to new portal users: In order to streamline the setup of new users, the system now allows automatic sending of PBX User Portal credentials directly to the user upon setup....
CompletePBX 5.0.66 – Important Privacy Fix
Important Call Recording Fix This version fixes a potential call recording issue introduced in version 5.0.65 Users that never upgraded to version 5.0.65 will not be affected For systems that are updated to version 5.0.65 it is highly recommended to upgrade to version...
CompletePBX 5.0.65 – Xorcom UC IP Phone Support
Xorcom UC Series IP Phones Provisioning Added The UC IP Phone series templates were added to the Endpoint Manager The available templates: UC902 - Basic IP Phone UC912G - 1GB IP Phone UC924 - Color IP Phone UC926 - Color IP Phone UC46 IP Phone Expansion Unit Asterisk...
CompletePBX 5.0.64 – Trunks, IP Phone Provisioning & More
Trunk Settings The default ring-time for trunks is now set at 120 seconds (previously 30 seconds) under Settings -> PBX Settings -> System General: It is now possible to set Channel, and not only Channel Group, as a destination for trunks (PBX -> External...
CompletePBX 5.0.63 – PBX High Availability Improvements & More
TwinStar PBX High-Availability Improvements TwinStar failover upon network disconnection TwinStar can now be set to detect network disconnection and failover to the secondary server in such case This is useful when each of the TwinStar servers is connected through a...
CompletePBX 5.0.55 – Gigaset IP Phones Support & More
Gigaset Maxwell IP Phones Provisioning Gigaset IP phones are now supported by CompletePBX Endpoint Manager. The following models are supported: Gigaset Maxwell Basic, Maxwell 2 and Maxwell 3 models. New Voicemail Destination - No Greeting A new "voicemail...
CompletePBX 5.0.54 – Click-to-Dial & Stabilization
Click-to-Dial from User Portal CompletePBX phone system user portal now allows the user to click-to-dial directly from any phonebook When clicking on any phone number in the phonebook on the user's portal, the user's extension will ring and upon picking up the phone...
CompletePBX 5.0.53 – Improvements in Ring Group, Fax, Call Recording and more
User-Friendly Filenames for Recorded Calls It is now possible to automatically change the recorded calls filenames to more user-friendly names using a scheduled job in the Task Manager. The script will overwrite the default system filenames with more descriptive...
CompletePBX 5.0.52 – Fixes GUI Crash after ddetect
DAHDI automatic configuration utility "ddetect" generates some configuration files with wrong ownership. As a result of that, any "Reload" operation done via the Web interface after running the utility fails. This utility is normally run only on initial system setup,...
CompletePBX 5.0.51 – Performance & User Experience Improvements
Phonebooks Improvements The PBX phonebooks are now available in the User Portal (User Portal: Portal -> My Extension -> Phonebook) Each phonebook can be exposed to the User Portal or hidden from it, besides the Extensions (company directory) which does not have...
CompletePBX 5.0.50 – API & Feature Improvements, Bug Fixes
PBX Name and Serial in About and Login Page The user-given system name and the serial number now both appear on login page and in the About window: Conference Calls Improvements It is now possible to enable and disable one-touch feature codes in any conference room. ...
Rapid Recovery Image Update 20180620
CompletePBX Download Images Updated Hardware Description 8GB USB disk on key (DOK) Software Description Name New Version Previous Version Software package 20180620 20170704 Changes The software is based on Debian Stretch. The hard disk folders where...
Image Software Update – CompletePBX 5.0.49
CompletePBX Download Images Updated CompletePBX version available for download on the website was updated to CompletePBX 5.0.49 It is always recommended to run an update (yum update command) after downloading an image
CompletePBX 5.0.49 – User Experience Improvements
PBX Name and Serial Number in GUI The CompletePBX GUI now shows the system name next to the logo in the upper left hand side. By default the PBX serial number will be shown. The administrator may change it to a descriptive name: Improved Date & Time Settings...
CompletePBX 5.0.48 – User Interface Improvements
Improved Voice Prompts Some of the voice prompts were replaced with more accurate and clearer voice prompts in English, Spanish and French. CDR (Call Details Reports) Improvements CDR now shows Emergency calls from unassigned hot-desking devices A problem with CDR...